Rynite® 545 NC010|PET-GF45|DuPont物性表报告及物性特性介绍,Rynite® 545 NC010|PET-GF45|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	2.5	cm³/10min	ISO 1133
温度(Temperature)	280	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.2	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.8	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	15500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	182	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2	%	ISO 527-1/-2
Tensile creep modulus (1h)	15600	MPa	ISO 899-1
Tensile creep modulus (1000h)	13300	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	60	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	11	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	11	kJ/m²	ISO 179/1eA
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	15513.2	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	2.1	%	ASTM D 638
抗压强度(Compressive Strength)	235	MPa	ASTM D 695
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	15168.4	MPa	ASTM D 790
抗弯强度(Flexural Strength)	283	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 120	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.112	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.118	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	252	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	225	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	180	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	230	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	15	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
Oxygen index	20	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
DTUL @ 66 psi	248	°C	ASTM D 648
DTUL @ 264 psi	226	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	254	°C	ASTM D 3418
极限氧指数(Limiting 氧指数(Oxygen Index))	20	%	ASTM D 2863

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.5	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	70	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	110	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E14	Ohm	IEC 60093
电气强度(Electric strength)	32	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	250	-	IEC 60112
ASTM数据(ASTM Data)
耗散因数(Dissipation Factor) (1 MHz)	0.005	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	4	-	ASTM D 150
表面电阻率(Surface Resistivity)	1E14	Ohm	ASTM D 257
体积电阻率(Volume Resistivity)	1E15	Ohm*cm	ASTM D 257

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	55	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1440	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.24	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1600	J/(kg K)	-
喷射温度(Ejection temperature)	175	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)