Sarlink® 18035|TPV|Teknor物性表报告及物性特性介绍,Sarlink® 18035|TPV|Teknor注塑参数详情-塑料物性表查询网

Product Texts

Property	值(Value)	单位(Unit)	Standard
Hardness Shore (5 sec delay, Extruded sample)	38A	-	ISO 868
Hardness Shore (5 sec delay, Injection molded sample)	43A	-	ISO 868
抗拉强度(Tensile strength) at break (Cross direction)	4.0	MPa	ISO 37
Modulus at 100% elongation (Cross direction)	1.1	MPa	ISO 37
断裂伸长率(Elongation at break) (Cross direction)	600	%	ISO 37
Compression set (70h/125°C)	52	%	ISO 815
抗拉强度(撕裂强度(Tear strength)) (unnicked angle, Cross Direction)	15	kN/m	ISO 34B
Hot air aging (168h/150°C, Cross Direction)			ISO 188
Change in hardness	1	points
Retention tensile strength at break	104	%
Retention modulus at 100% elongation	111	%
Retention elongation at break	101	%
Hot air aging (1000h/135°C, Cross Direction)			ISO 188
Change in hardness	-1	points
Retention tensile strength at break	100	%
Retention modulus at 100% elongation	104	%
Retention elongation at break	98	%
Volume swell (70h/125°C in IRM 903 oil)	150	%	ISO 1817
Rheology (Apparent Shear Viscosity @ 206 1/s, 200°C)	270	Pa.s	ISO 11443 Capillary

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
Stress at 100% elongation	2.1	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	200	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	2.2	MPa	ISO 527-1/-2
压缩设置下的恒应变(Compression Set under constant strain) (23°C)	15	%	ISO 815
压缩设置下的恒应变(Compression Set under constant strain) (70°C)	30	%	ISO 815

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	930	kg/m³	ISO 1183

CharacteristicsProcessingInjection Molding, Other ExtrusionRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central AmericaDisclaimerCopyright M-Base .