Sarlink® 5755B|TPV|Teknor物性表报告及物性特性介绍,Sarlink® 5755B|TPV|Teknor注塑参数详情-塑料物性表查询网

Product Texts

Property	值(Value)	单位(Unit)	Standard
Hardness Shore (5 sec delay, Extruded sample)	55A	-	ISO 868
Hardness Shore (5 sec delay, Injection molded sample)	58A	-	ISO 868
抗拉强度(Tensile strength) at break (Cross direction)	5.2	MPa	ISO 37
Modulus at 100% elongation (Cross direction)	1.9	MPa	ISO 37
断裂伸长率(Elongation at break) (Cross direction)	550	%	ISO 37
Compression set (70h/125°C)	42	%	ISO 815
Hot air aging (168h/150°C, Cross Direction)			ISO 188
Change in hardness	-2	points
Retention tensile strength at break	88	%
Retention modulus at 100% elongation	98	%
Retention elongation at break	98	%
Hot air aging (1000h/135°C, Cross Direction)			ISO 188
Change in hardness	1	points
Retention tensile strength at break	94	%
Retention modulus at 100% elongation	103	%
Retention elongation at break	110	%
Volume swell (70h/125°C in IRM 903 oil)	99	%	ISO 1817
Rheology (Apparent Shear Viscosity @ 206 1/s, 200°C)	315	Pa.s	ISO 11443 Capillary

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
Stress at 100% elongation	3.1	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	280	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	4.6	MPa	ISO 527-1/-2
压缩设置下的恒应变(Compression Set under constant strain) (23°C)	17	%	ISO 815
压缩设置下的恒应变(Compression Set under constant strain) (70°C)	27	%	ISO 815
抗拉强度(撕裂强度(Tear strength))	21	kN/m	ISO 34-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	970	kg/m³	ISO 1183

CharacteristicsProcessingOther ExtrusionDelivery formBlackSpecial CharacteristicsU.V. stabilized or stable to weatherFeaturesLow FoggingChemical ResistanceGeneral Chemical ResistanceApplicationsAutomotiveRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central AmericaDisclaimerCopyright M-Base .