CALIBRE™ 200-3|PC|Styron物性表报告及物性特性介绍,CALIBRE™ 200-3|PC|Styron注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	3	g/10min	ASTM D 1238
温度(Temperature)	300	°C	-
负载(Load)	1.2	kg	-
模具收缩(Mold Shrinkage) (MD)	0.006	mm/mm	ASTM D 955
密度(Density) (73°F)	1200	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.15	%	ASTM D 570
吸水率(Water Absorption) (Equilibrium)	0.32	%	ASTM D 570

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2480	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	72	MPa	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	2410	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	93	kJ/m²	ISO 180/1A
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	60	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	72.4	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	150	%	ASTM D 638
抗弯强度(Flexural Strength)	96.5	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 118	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.96	kJ/m	ASTM D 256
悬臂梁式冲击无切口(Izod Impact unnotched) (1/8 in)	N	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
燃烧性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2	mm	IEC 60695-11-10
Oxygen index	26	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.6	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	68	E-6/K	ASTM D 696
DTUL @ 264 psi	132	°C	ASTM D 648
Vicat 温度(Temperature)	151	°C	ASTM D 1525

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
电气强度(Electric strength)	17	kV/mm	IEC 60243-1
ASTM数据(ASTM Data)
绝缘强度(Dielectric Strength) (Short Time)	17	kV/mm	ASTM D 149
耗散因数(Dissipation Factor) (60 Hz)	0.001	-	ASTM D 150
耗散因数(Dissipation Factor) (1 MHz)	0.002	-	ASTM D 150
介电常数(Dielectric Constant) (60 Hz)	3	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	3	-	ASTM D 150
体积电阻率(Volume Resistivity)	>1E15	Ohm*cm	ASTM D 257

Optical properties	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
Haze	1	%	ASTM D 1003
Light Transmittance	89	%	ASTM D 1003
Index of Refraction	1.59	-	ASTM D 542

CharacteristicsProcessingProfile Extrusion, Sheet ExtrusionDelivery formNatural ColorSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatFeaturesMelt Strength, NSF ApprovalEcological valuationFood approval FDA 21 CFRRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .