Lexan FXA121R|PC|沙特基础物性表报告及物性特性介绍,Lexan FXA121R|PC|沙特基础注塑参数详情-塑料物性表查询网

娴佸彉鎬ц兘(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鐔斾綋浣撶Н娴佸姩閫熺巼(Melt volume-flow rate) (MVR)	21	cm鲁/10min	ISO 1133
娓╁害(Temperature)	300	掳C	ISO 1133
璐熻浇(Load)	1.2	kg	ISO 1133
鎴愬瀷鏀剁缉(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎷変几妯￠噺(Tensile Modulus)	2350	MPa	ISO 527-1/-2
灞堟湇搴斿姏(Yield stress)	63	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	6	%	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	50	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	50	%	ISO 527-1/-2
寮洸寮规€фā閲?Flexural modulus) (23掳C)	2300	MPa	ISO 178
鐞冨帇鐥曠‖搴?Ball indentation hardness)	95	MPa	ISO 2039-1

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	122	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	133	掳C	ISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)	140	掳C	ISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	70	E-6/K	ISO 11359-1/-2

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsTransparentRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .