Lexan IFX5420Z|PC|沙特基础物性表报告及物性特性介绍,Lexan IFX5420Z|PC|沙特基础注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
鐔斾綋娴佸姩鎸囨暟(Melt Flow Index)	12.5	g/10min	ASTM D 1238
娓╁害(Temperature)	300	掳C	-
璐熻浇(Load)	1.5	kg	-
妯″叿鏀剁缉(Mold Shrinkage) (MD)	0.006	mm/mm	ASTM D 955
瀵嗗害(Density) (73掳F)	1200	kg/m鲁	ASTM D 792
鍚告按鐜?Water Absorption) (24hr)	0.15	%	ASTM D 570
鍚告按鐜?Water Absorption) (Equilibrium)	0.35	%	ASTM D 570

娴佸彉鎬ц兘(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鐔斾綋浣撶Н娴佸姩閫熺巼(Melt volume-flow rate) (MVR)	12	cm鲁/10min	ISO 1133
娓╁害(Temperature)	300	掳C	ISO 1133
璐熻浇(Load)	1.2	kg	ISO 1133

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎷変几妯￠噺(Tensile Modulus)	2350	MPa	ISO 527-1/-2
灞堟湇搴斿姏(Yield stress)	65	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	6	%	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	70	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	>50	%	ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	N	kJ/m虏	ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)	N	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	73	kJ/m虏	ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)	14	kJ/m虏	ISO 179/1eA
寮洸寮规€фā閲?Flexural modulus) (23掳C)	2250	MPa	ISO 178
鎮噦姊佸紡鍐插嚮鍒囧彛 (23掳C)	70	kJ/m虏	ISO 180/1A
鎮噦姊佸紡鍐插嚮鍒囧彛	12	kJ/m虏	ISO 180/1A
娓╁害(Temperature)	-30	掳C	ISO 180/1A
鎮噦姊佸紡鍐插嚮鏃犲垏鍙?Izod Impact unnotched) (23掳C)	70	kJ/m虏	ISO 180/1U
ASTM鏁版嵁(ASTM Data)
鎷変几妯￠噺(Tensile Modulus)	2400	MPa	ASTM D 638
鎶楁媺寮哄害(Tensile Strength) at Yield	62	MPa	ASTM D 638
鎶楁媺寮哄害(Tensile Strength) at Break	65	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	7	%	ASTM D 638
鏂浼搁暱鐜?Elongation at Break)	110	%	ASTM D 638
寮洸寮规€фā閲?寮洸寮规€фā閲?Flexural Modulus))	2300	MPa	ASTM D 790
娲涙皬纭害(Rockwell Hardness)	R 118	-	ASTM D 785
Taber Abrasion Resistance	10	mg/1000 cycles	ASTM D 1044
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)	0.817	kJ/m	ASTM D 256
鎮噦姊佸紡鍐插嚮鍒囧彛 (Low-娓╁害(Temperature))	0.13	kJ/m	ASTM D 256
娓╁害(Temperature)	-30	掳C	ASTM D 256

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	123	掳C	ISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)	141	掳C	ISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	70	E-6/K	ISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
ASTM鏁版嵁(ASTM Data)
鐑啫鑳€绯绘暟(Coefficient of Thermal Expansion) (TD)	70	E-6/K	ASTM D 696
Vicat 娓╁害(Temperature)	154	掳C	ASTM D 1525
Thermal Conductivity (melt state)	0.19	W/(m K)	ASTM C 177
Specific Heat	1250	J/(kg K)	ASTM C 351

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鍚告按鐜?Water absorption)	0.35	%	Sim. to ISO 62
鍚告箍鎬?Humidity absorption)	0.15	%	Sim. to ISO 62
瀵嗗害(Density)	1200	kg/m鲁	ISO 1183

Optical properties	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
Haze	2.2	%	ASTM D 1003
Light Transmittance	2.2	%	ASTM D 1003
Index of Refraction	1.59	-	ASTM D 542

CharacteristicsProcessingInjection MoldingAdditivesRelease agentFeaturesWeldableRegional Availability .