Panlite K-1300Y|PC|Teijin Chemicals物性表报告及物性特性介绍,Panlite K-1300Y|PC|Teijin Chemicals注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	2.5	cm³/10min	ISO 1133
温度(Temperature)	300	°C	ISO 1133
负载(Load)	1.2	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2350	MPa	ISO 527-1/-2
屈服应力(Yield stress)	60	MPa	ISO 527-1/-2
屈服应变(Yield strain)	6	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	89	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	2200	MPa	ISO 178

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	132	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	145	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	151	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	70	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
燃烧性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.4	mm	IEC 60695-11-10

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (100Hz)	3.1	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	10	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	90	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	30	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	250	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1200	kg/m³	ISO 1183

Optical properties	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
Light Transmittance	88	%	ASTM D 1003
Index of Refraction	1.58	-	ASTM D 542

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Blow Molding, Rotational Molding, Pipe/Tube ExtrusionAdditivesRelease agentApplicationsGeneral PurposeRegional AvailabilityNorth America, Europe, .