POLYMAN® (PC) XP 41 R 10 GF|PC-GF10|A. Schulman物性表报告及物性特性介绍,POLYMAN® (PC) XP 41 R 10 GF|PC-GF10|A. Schulman注塑参数详情-塑料物性表查询网

Schulman Product Texts10% glass fibre reinforced PC2	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.4	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.4	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3800	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	85	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	4	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	12	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
玻璃化转变温度(Glass transition temperature) (10°C/min)	150	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	138	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	144	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	60	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3	-	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
相比漏电起痕指数(Comparative tracking index)	175	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.32	%	Sim. to ISO 62
密度(Density)	1260	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1130	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.21	W/(m K)	-
Eff. thermal diffusivity	1E-7	m²/s	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7390	-	ISO ....-2
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	250	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formGranulesAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSINGPretreatment .
[/td][/tr][/table]