Xylex X8303CL|(PC+Polyester)|沙特基础物性表报告及物性特性介绍,Xylex X8303CL|(PC+Polyester)|沙特基础注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	30	g/10min	ASTM D 1238
温度(Temperature)	265	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.006	mm/mm	ASTM D 955
密度(Density) (73°F)	1200	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	27	cm³/10min	ISO 1133
温度(Temperature)	265	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	1690	MPa	ISO 527-1/-2
屈服应力(Yield stress)	48	MPa	ISO 527-1/-2
屈服应变(Yield strain)	6	%	ISO 527-1/-2
破坏时应变(Stress at break)	43	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	14	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	1720	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	20	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	9	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	1680	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	46	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	44	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	5	%	ASTM D 638
断裂伸长率(Elongation at Break)	140	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	1620	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	1	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.1	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	90	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	100	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	92	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	98	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	92	°C	ASTM D 648
DTUL @ 264 psi	80	°C	ASTM D 648
Vicat 温度(Temperature)	98	°C	ASTM D 1525

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1200	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modified, U.V. stabilized or stable to weather, TransparentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .