CALIBRE™ 301-58 LT|PC|Styron物性表报告及物性特性介绍,CALIBRE™ 301-58 LT|PC|Styron注塑参数详情-塑料物性表查询网

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	2500	MPa	ISO 178
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	2300	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	60	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	48	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	6	%	ASTM D 638
断裂伸长率(Elongation at Break)	60	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2500	MPa	ASTM D 790
抗弯强度(Flexural Strength)	100	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 118	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.58	kJ/m	ASTM D 256
悬臂梁式冲击无切口(Izod Impact unnotched) (1/8 in)	N	kJ/m	ASTM D 256

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
电气强度(Electric strength)	17	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	250	-	IEC 60112
ASTM数据(ASTM Data)
绝缘强度(Dielectric Strength) (Short Time)	17	kV/mm	ASTM D 149
耗散因数(Dissipation Factor) (1 MHz)	0.002	-	ASTM D 150
介电常数(Dielectric Constant) (60 Hz)	3	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	3	-	ASTM D 150
体积电阻率(Volume Resistivity)	>1E15	Ohm*cm	ASTM D 257

CharacteristicsProcessingInjection MoldingAdditivesRelease agentApplicationsNear East/AfricaDisclaimerCopyright M-Base .