Bergaflex® BFI H 35A-322|TPS|PolyOne物性表报告及物性特性介绍,Bergaflex® BFI H 35A-322|TPS|PolyOne注塑参数详情-塑料物性表查询网

Bergaflex® BFI H 35A-322|TPS|PolyOne

Bergaflex® BFI H 35A-322|TPS|PolyOne 物性表: Bergaflex® BFI H 35A-322|TPS|PolyOne物性表及特性介绍,Bergaflex® BFI H 35A-322|TPS|PolyOne注塑参数详情,如需Bergaflex® BFI H 35A-322|TPS|PolyOne下载, 可到相关下载区下载

Product TextsBergaflex H35A-322, TPE-S, SEBS13	MPa	ISO 527-1/-2
Stress at 300% elongation	3	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	>300	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	4.2	MPa	ISO 527-1/-2
压缩设置下的恒应变(Compression Set under constant strain) (23°C)	17	%	ISO 815
压缩设置下的恒应变(Compression Set under constant strain) (70°C)	30	%	ISO 815
压缩设置下的恒应变(Compression Set under constant strain) (100°C)	48	%	ISO 815
邵尔A硬度(Shore A hardness) (3s)	35	-	ISO 868

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1150	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	170	°C	ISO 294
Injection Molding, mold temperature	30	°C	ISO 10724

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Blow Molding, CalanderingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityEuropeDisclaimerCopyright M-Base .
[/td][/tr][/table]

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-99381.html

免责声明: 本文 Bergaflex® BFI H 35A-322|TPS|PolyOne 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络