Evoprene鈩?COGEE 681|TPS|AlphaGary物性表报告及物性特性介绍,Evoprene鈩?COGEE 681|TPS|AlphaGary注塑参数详情-塑料物性表查询网

Product TextsNote: mechanical properties were originally reported according to ISO 37. Comparison with data according ISO 527 seems to be acceptable in this case. It cannot be assumed that these data cover all uses, applications or conditions in connection with this material. Accordingly, AlphaGary makes no warranty, expressed or implied, that the product conforms to these data.Each customer or user of AlphaGary's materials is solely responsible for determining the suitability of the material(s) selected for the intended application. Each customer or user must conduct its own studies and gain all necessary approvals and certifications as required for the intended finished product. Customer shall not copy, reverse engineer, analyze or have analyzed AlphaGary's compounds or allow others to do so.

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎶楁媺寮哄害(Tensile Strength)	5.8	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	490	%	ISO 527-1/-2
Stress at 100% elongation	1.3	MPa	ISO 527-1/-2
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (23掳C)	28	%	ISO 815
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (70掳C)	25	%	ISO 815
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (100掳C)	27	%	ISO 815
鎶楁媺寮哄害(鎾曡寮哄害(Tear strength))	24	kN/m	ISO 34-1
閭靛皵A纭害(Shore A hardness) (3s)	40	-	ISO 868

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
瀵嗗害(Density)	950	kg/m鲁	ISO 1183

CharacteristicsProcessingInjection MoldingChemical ResistanceOzone ResistanceEcological valuationFood approval FDA 21 CFRRegional AvailabilityNorth America, EuropeDisclaimerCopyright M-Base .