- 熔体流动速率 [g/10min]: 9.0
- 密度 [g/cm3]: 0.96
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
| Viscosity | 1.00e+6 cP @Shear Rate 50.0 1/s, Temperature 190 °C | 1.00e+6 cP @Shear Rate 50.0 1/s, Temperature 374 °F | estimated from log-log graph |
| Melt Flow | 9.0 g/10 min @Load 2.16 kg, Temperature 190 °C | 9.0 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Seal Strength | 2500 - 3000 g/25 mm | 2500 - 3000 g/in | PP, bar temp 150-200°C |
| 4500 g/25 mm | 4500 g/in | HDPE, bar temp 150-200°C | |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 55.0 °C | 131 °F | Freezing Point via DSC/ASTM D3418 |
| 75.0 °C | 167 °F | Upon Melting via DSC/ASTM D3418 | |
| Vicat Softening Point | 49.0 °C | 120 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 220 °C | 428 °F | Typical extrusion metering zone. Do not exceed 238°C (460°F). |
| Nozzle Temperature | 220 °C | 428 °F | Die |