- 熔体流动速率 [g/10min]: 20.0
- 密度 [g/cm3]: 1.03
- 缺口冲击强度: 1.17
- 拉伸强度 [MPa]: 16.0
- 弯曲模量 [MPa]: 1.40
- 硬度: 60.0
- 热变形温度 [℃]: 87.8
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.03 g/cc | 0.0372 lb/in³ | ASTM D792 |
Linear Mold Shrinkage | 0.010 cm/cm | 0.010 in/in | MD; ASTM D955 |
Melt Flow | 20 g/10 min | 20 g/10 min | ASTM D1238 |
Ash | 20 % | 20 % | ASTM D2584 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 60 | 60 | ASTM D785 |
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Tensile Strength, Yield | 16.0 MPa | 2320 psi | ASTM D638 |
Elongation at Break | 25 % | 25 % | ASTM D638 |
Elongation at Yield | 4.0 % | 4.0 % | ASTM D638 |
Tensile Modulus | 1.20 GPa | 174 ksi | ASTM D638 |
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Flexural Modulus | 1.40 GPa | 203 ksi | ASTM D790 |
Izod Impact, Notched | 1.17 J/cm | 2.20 ft-lb/in | ASTM D256 |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 87.8 °C | 190 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 52.8 °C | 127 °F |