- 密度 [g/cm3]: 1.67
- 吸水率 [%]: 0.22
- 缺口冲击强度: 0.168
- 弯曲强度 [MPa]: 59.0
- 弯曲模量 [MPa]: 11.2
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.700 g/cc | 0.0253 lb/in³ | ASTM D1895 |
| Density | 1.67 g/cc | 0.0603 lb/in³ | ASTM D792 |
| Water Absorption | 0.22 % | 0.22 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0036 cm/cm | 0.0036 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 74 | 74 | ASTM D785 |
| Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
| Elongation at Break | 0.81 % | 0.81 % | ASTM D638 |
| Tensile Modulus | 13.3 GPa | 1930 ksi | ASTM D638 |
| Flexural Strength | 84.0 MPa | 12200 psi | ASTM D790 |
| Flexural Modulus | 11.2 GPa | 1620 ksi | ASTM D790 |
| Compressive Strength | 167 MPa | 24200 psi | ASTM D695 |
| Izod Impact, Notched | 0.168 J/cm | 0.315 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.218 J/cm² | 1.04 ft-lb/in² | ASTM D256 |
| Impact | 96 | 96 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 7.50e+13 ohm-cm | 7.50e+13 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.5 | 6.5 | ASTM D150 |
| Dielectric Strength | 10.4 kV/mm | 264 kV/in | Step by Step; ASTM D149 |
| 13.6 kV/mm | 345 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.047 | 0.047 | ASTM D150 |
| Arc Resistance | 186 sec | 186 sec | ASTM D495 |
| Comparative Tracking Index | 425 V | 425 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 155 °C | 311 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 194 °C | 381 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.62 % | 0.62 % | 240 hr, 105ºC; ASTM D1299 |