DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness

DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness 物性表: DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness物性表及特性介绍,DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness注塑参数详情,如需DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.94
 
Physical PropertiesMetricEnglishComments
Bulk Density 0.940 g/cc0.0340 lb/in³
Density 0.940 g/cc0.0340 lb/in³
Thickness 178 microns7.00 milNominal
 188 microns7.40 milTypical; ASTM D374
 
Mechanical PropertiesMetricEnglishComments
Film Elongation at Break, MD 13.1 %13.1 %ASTM D828
Film Elongation at Break, TD 15.9 %15.9 %ASTM D828
Flex Crack Resistance 86008600Cycles of Fold Endurance; ASTM D2176
Tear Strength, Total 24.0 N5.40 lb (f)Initial in TD; ASTM D1004
 55.0 N12.4 lb (f)Initial in MD; ASTM D1004
Film Tensile Strength at Break, MD 91.5 MPa13300 psiCalculated from mfr's report of 172 N/cm per ASTM D828 and the typical thickness
Film Tensile Strength at Break, TD 42.0 MPa6090 psiCalculated from mfr's report of 79 N/cm per ASTM D828 and the typical thickness
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cm50% RH; tested on 10 mil thickness sample; ASTM D257
Dielectric Constant  2.5
@Frequency 60 Hz
2.5
@Frequency 60 Hz
ASTM D150
 2.5
@Frequency 1000 Hz
2.5
@Frequency 1000 Hz
ASTM D150
Dielectric Strength 30.0 kV/mm762 kV/inAC Rapid Rise; ASTM D149
 51.0 kV/mm1300 kV/inFull-wave Impulse; ASTM D3426
Dissipation Factor 0.0080
@Frequency 60 Hz
0.0080
@Frequency 60 Hz
ASTM D150
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 220 °C428 °FElectrical insulation

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33241.html

免责声明: 本文 DuPont™ Nomex® 414 Paper, 7 mil Nominal Thickness 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4