- 吸水率 [%]: 0.08
- 缺口冲击强度: 23.5
- 弯曲模量 [MPa]: 193
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.85 g/cc | 1.85 g/cc | ASTM D792 | ||
| Water Absorption | 0.080 % | 0.080 % | ASTM D570 | ||
| Linear Mold Shrinkage | 0.00050 cm/cm | 0.00050 in/in | ASTM D955 | ||
| Spiral Flow | 30.5 cm @Temperature 163 °C | 12.0 in @Temperature 325 °F | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | 268 MPa | 38900 psi | ASTM D638 | ||
| Flexural Strength | 475 MPa | 68900 psi | ASTM D790 | ||
| Flexural Modulus | 193 GPa | 28000 ksi | ASTM D790 | ||
| Izod Impact, Notched | 23.5 J/cm | 44.0 ft-lb/in | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 3.00e+14 ohm-cm | 3.00e+14 ohm-cm | ASTM D257 | ||
| Dielectric Constant | 4.3 @Frequency 100 Hz | 4.3 @Frequency 100 Hz | ASTM D150 | ||
| Dielectric Strength | 19.7 kV/mm | 500 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.0080 @Frequency 100 Hz | 0.0080 @Frequency 100 Hz | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 175 °C | 347 °F | |||
| 300 °C | 572 °F | Deflection Temperature, Load not specified; ASTM D648 | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 121 - 166 °C | 250 - 330 °F | Mold Temperature | ||
| Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | |||
| Shelf Life | 6.00 Month @Temperature -17.8 °C | 6.00 Month @Temperature 0.000 °F | |||
| Descriptive Properties | |||||
| Fiber Length (in) | 1 | Glass | |||