- 吸水率 [%]: 0.2
- 缺口冲击强度: 0.854
- 弯曲强度 [MPa]: 37.9
- 弯曲模量 [MPa]: 12.4
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.99 g/cc | 1.99 g/cc | ASTM D792 |
| Water Absorption | 0.20 % | 0.20 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00026 cm/cm | 0.00026 in/in | ISO 2577 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 37.9 MPa | 5500 psi | ASTM D638 |
| Tensile Modulus | 14.5 GPa | 2100 ksi | tangent; ASTM D638 |
| Flexural Strength | 86.2 MPa | 12500 psi | ASTM D790-1 |
| Flexural Modulus | 12.4 GPa | 1800 ksi | Tangent; ASTM D790-1 |
| Poissons Ratio | 0.30 | 0.30 | ISO 527 |
| Shear Modulus | 5.58 GPa | 809 ksi | Calculated |
| Izod Impact, Notched | 0.854 J/cm | 1.60 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 2.03 J/cm | 3.80 ft-lb/in | ASTM D4812 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 36.0 µm/m-°C @Temperature 20.0 °C | 20.0 µin/in-°F @Temperature 68.0 °F | Z-direction; ASTM D696 |
| CTE, linear, Transverse to Flow | 27.0 µm/m-°C @Temperature 20.0 °C | 15.0 µin/in-°F @Temperature 68.0 °F | XY-direction; ASTM D696 |
| Specific Heat Capacity | 1.51 J/g-°C | 0.360 BTU/lb-°F | ASTM D1269E |
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | ASTM D1269E |