| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.10 g/cc | 1.10 g/cc | |||
| Solids Content | 33 % | 33 % | by volume | ||
| 40 % | 40 % | by weight | |||
| Volatile Organic Compounds (VOC) Content | 60 g/l | 60 g/l | |||
| Viscosity | 600 - 1200 cP | 600 - 1200 cP | |||
| Thickness | 38.1 microns | 1.50 mil | recommended dry film thickness | ||
| 178 microns | 7.00 mil | estimated wet film thickness | |||
| Storage Temperature | 4.44 - 32.2 °C | 40.0 - 90.0 °F | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 593 °C | 1100 °F | Continuous | ||
| Flash Point | >= 100 °C | >= 212 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature | ||
| Dry Time | >= 0.5 hour | >= 0.5 hour | Recoat | ||
| 1 hour | 1 hour | Touch | |||
| 2 hour | 2 hour | Handling | |||
| Cure Time | >= 6.00 min | >= 0.100 hour | Air Set prior to curing | ||
| 60.0 min | 1.00 hour | at 450°F; Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if the service temperature is below 750°F. | |||
| Shelf Life | 12.0 Month | 12.0 Month | |||
| Descriptive Properties | |||||
| Dry Film Coverage ft2/gal | 535 | at 1 mil | |||
| Thinner | Water | ||||
