Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En

Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En 物性表: Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En物性表及特性介绍,Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En注塑参数详情,如需Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.8
 
Physical PropertiesMetricEnglishComments
Density 2.80 g/cc0.101 lb/in³Silicone Property; Arlon SQA-TMS-024
Thickness 50.8 microns2.00 milETFE Film; Arlon SQA-TMS-003
 457 microns18.0 milSide 1; Arlon SQA-TMS-003
 508 microns20.0 milOverall Thickness; Arlon SQA-TMS-003
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 7777Silicone Property; ASTM D2240
Tensile Strength 4.72 MPa685 psiSilicone Property; ASTM D412
Elongation at Break 125 %125 %Silicone Property; ASTM D412
Modulus of Elasticity 0.0245 GPa
@Strain <=1.00 %
3.55 ksi
@Strain <=1.00 %
Silicone Property; Arlon SQA-TMS-008
Poissons Ratio 0.500.50Silicone Property
Peel Strength 0.228 kN/m1.30 pliBond Strength (S1 to S1); Arlon SQA-TMS-011
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant 6.9
@Frequency 1.00e+6 Hz
6.9
@Frequency 1.00e+6 Hz
Silicone Property; IPC TM 6550 - 2.5.5.3
Dielectric Strength >= 45.3 kV/mm>= 1150 kV/inASTM D149
Dissipation Factor 0.0044
@Frequency 1.00e+6 Hz
0.0044
@Frequency 1.00e+6 Hz
Silicone Property; IPC TM 6550 - 2.5.5.3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 105 µm/m-°C
@Temperature 20.0 - 160 °C
58.3 µin/in-°F
@Temperature 68.0 - 320 °F
Silicone Property; ASTM E831
Specific Heat Capacity 0.820 J/g-°C
@Temperature 100 °C
0.196 BTU/lb-°F
@Temperature 212 °F
Silicone Property; Arlon SQA-TMS-052
Thermal Conductivity 1.40 W/m-K9.72 BTU-in/hr-ft²-°FSilicone Property; ASTM E1530
Maximum Service Temperature, Inert 204 °C400 °F
Minimum Service Temperature, Air -100 °C-148 °F
Glass Transition Temp, Tg -118 °C-180 °FSilicone Property; ASTM D3418
UL RTI, Electrical 150 °C302 °F
UL RTI, Mechanical without Impact 150 °C302 °F
Flammability, UL94 V-0V-0"VTM-0"; ETFE Film (E311412)
 V-0V-0Silicone (E54153)
 
Processing PropertiesMetricEnglishComments
Shelf Life 3.00 Month
@Temperature 7.22 °C
3.00 Month
@Temperature 45.0 °F
 
Descriptive Properties
ColorClearSubstrate
 Gray
Plasticity (mm)2.3Silicone Property; Arlon SQA-TMS-005

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34356.html

免责声明: 本文 Arlon Secure™ 25A58B020 Thermally Conductive Silicone Rubber Adhesive on ETFE Film for Solar Cell En 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4