- 密度 [g/cm3]: 1.3
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.30 g/cc | 0.0470 lb/in³ | Silicone Property; Arlon SQA-TMS-024 | ||
| Thickness | 127 microns | 5.00 mil | Layer 1; Arlon SQA-TMS-003 | ||
| 457 microns | 18.0 mil | Substrate | |||
| 991 microns | 39.0 mil | Layer 2; Arlon SQA-TMS-003 | |||
| 1570 microns | 62.0 mil | Overall Thickness; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 50 | 50 | Silicone Property; Arlon SQA-TMS-014 | ||
| Tensile Strength | 4.41 MPa | 640 psi | Silicone Property; Arlon SQA-TMS-006 | ||
| Elongation at Break | 170 % | 170 % | Silicone Property; Arlon SQA-TMS-006 | ||
| Peel Strength | 1.47 kN/m | 8.40 pli | Bond Strength; ASTM D624 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 20.1 kV/mm | 510 kV/in | ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Inert | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Post Cure Cycle | ||
| 15.0 min @Pressure 0.345 MPa, Temperature 177 °C | 0.250 hour @Pressure 50.0 psi, Temperature 350 °F | Recommended Cure Cycle | |||
| Shelf Life | 6.00 Month @Temperature 23.9 °C | 6.00 Month @Temperature 75.0 °F | |||
| Descriptive Properties | |||||
| Color | Red | ||||
| Total Product Weight (oz/yd2) | 65 | Arlon SQA-TMS-025 | |||