Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate

Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate 物性表: Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate物性表及特性介绍,Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate注塑参数详情,如需Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.912
 
Physical PropertiesMetricEnglishComments
Density 0.912 g/cc0.0329 lb/in³
Viscosity 0.63 cP
@Temperature 20.0 °C
0.63 cP
@Temperature 68.0 °F
Molecular Weight 114.1 g/mol114.1 g/mol
Vapor Pressure 0.0213 bar
@Temperature 20.0 °C
16.0 torr
@Temperature 68.0 °F
 
Chemical PropertiesMetricEnglishComments
Acid Value <= 0.040<= 0.040Rohm Method: M4 (acid-base titr., MAAC)
 
Thermal PropertiesMetricEnglishComments
Boiling Point 118.8 °C
@Pressure 0.1013 MPa
245.8 °F
@Pressure 14.69 psi
Flash Point 17.5 °C63.5 °FDIN 51755
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.415
@Temperature 20.0 °C
1.415
@Temperature 68.0 °F
 
Processing PropertiesMetricEnglishComments
Moisture Content <= 0.020 %<= 0.020 %Rohm Method: M3 (according to K. Fischer)
 
Descriptive Properties
Colormax. 5Rohm Method: M5 APHA
Degree of Purity (%)min. 99.5Rohm Method: M2-19 (GC)
Explosion limits in air (Vol. %)1.8 up to saturation
Heat of Polymerization (kJ/mol)57.8
Heat of Vaporization (kJ/mol)39.8
MEHQ8-12ppm, Rohm Method: M1-1 (HPLC), MEHQ
Solidification Point (°C)below -75
Solubility (%)0.4ester in water
 0.77water in ester

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34603.html

免责声明: 本文 Evonik CYRO MHOROMER® AM 101 Ethyl Methacrylate 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4