Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled

Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled 物性表: Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.74
  • 吸水率 [%]: 0.035
  • 缺口冲击强度: 0.156
  • 断裂伸长率 [%]: 55.0
  • 弯曲强度 [MPa]: 31.0
  • 弯曲模量 [MPa]: 10.0
 
Physical PropertiesMetricEnglishComments
Density 1.74 - 2.06 g/cc0.0629 - 0.0744 lb/in³Average value: 1.83 g/cc Grade Count:8
Water Absorption 0.0350 - 0.0480 %0.0350 - 0.0480 %Average value: 0.0431 % Grade Count:8
Linear Mold Shrinkage 0.00173 - 0.00420 cm/cm0.00173 - 0.00420 in/inAverage value: 0.00261 cm/cm Grade Count:8
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 58.0 - 61.058.0 - 61.0Average value: 59.2 Grade Count:5
Tensile Strength, Ultimate 31.0 - 89.0 MPa4500 - 12900 psiAverage value: 43.9 MPa Grade Count:8
Elongation at Break 0.236 - 0.580 %0.236 - 0.580 %Average value: 0.399 % Grade Count:8
Modulus of Elasticity 10.3 - 29.0 GPa1490 - 4210 ksiAverage value: 15.2 GPa Grade Count:8
Flexural Yield Strength 55.0 - 163 MPa7980 - 23600 psiAverage value: 76.3 MPa Grade Count:8
Flexural Modulus 10.0 - 26.0 GPa1450 - 3770 ksiAverage value: 13.3 GPa Grade Count:8
Compressive Yield Strength 117 - 269 MPa17000 - 39000 psiAverage value: 151 MPa Grade Count:8
Izod Impact, Notched 0.156 - 0.174 J/cm0.292 - 0.326 ft-lb/inAverage value: 0.163 J/cm Grade Count:7
Charpy Impact, Notched 0.144 - 0.260 J/cm²0.685 - 1.24 ft-lb/in²Average value: 0.178 J/cm² Grade Count:8
 
Thermal PropertiesMetricEnglishComments
CTE, linear 32.0 - 38.0 µm/m-°C
@Temperature 40.0 - 130 °C
17.8 - 21.1 µin/in-°F
@Temperature 104 - 266 °F
Average value: 34.0 µm/m-°C Grade Count:3
Thermal Conductivity 1.22 - 1.94 W/m-K
@Temperature 100 - 100 °C
8.47 - 13.5 BTU-in/hr-ft²-°F
@Temperature 212 - 212 °F
Average value: 1.58 W/m-K Grade Count:2
Maximum Service Temperature, Air 200 - 257 °C392 - 495 °FAverage value: 220 °C Grade Count:7
Deflection Temperature at 1.8 MPa (264 psi) 180 - 222 °C356 - 432 °FAverage value: 193 °C Grade Count:8
Shrinkage 0.0100 - 0.0860 %0.0100 - 0.0860 %Average value: 0.0539 % Grade Count:8

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34729.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Mineral/Graphite Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4