| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.35 - 1.85 g/cc | 1.35 - 1.85 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 40 - 50 | 40 - 50 | ASTM D2240 | ||
| Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 | ||
| Elongation at Break | >= 75 % | >= 75 % | ASTM D412 | ||
| Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 | ||
| Compression Set | <= 35 % @Temperature 100 °C, Time 252000 sec | <= 35 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.010 ohm-cm | 0.010 ohm-cm | as supplied without pressure sensitive adhesive; MIL-DTL-83528 | ||
| 0.020 ohm-cm | 0.020 ohm-cm | Post Tensile Set; MIL-DTL-83528 Para.4.6.9 | |||
| Shielding Effectiveness | >= 60 dB @Frequency 200000 Hz | >= 60 dB @Frequency 200000 Hz | MIL-DTL-83528 Para.4.6.12 | ||
| >= 80 dB @Frequency 1.00e+10 Hz | >= 80 dB @Frequency 1.00e+10 Hz | MIL-DTL-83528 Para.4.6.12 | |||
| >= 90 dB @Frequency 2.00e+9 Hz | >= 90 dB @Frequency 2.00e+9 Hz | MIL-DTL-83528 Para.4.6.12 | |||
| >= 100 dB @Frequency 1.00e+8 Hz | >= 100 dB @Frequency 1.00e+8 Hz | MIL-DTL-83528 Para.4.6.12 | |||
| >= 100 dB @Frequency 5.00e+8 Hz | >= 100 dB @Frequency 5.00e+8 Hz | MIL-DTL-83528 Para.4.6.12 | |||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.900 W/m-K @Pressure 2.07 MPa | 6.25 BTU-in/hr-ft²-°F @Pressure 300 psi | ASTM D5470 | ||
| Maximum Service Temperature, Air | 200 °C | 392 °F | |||
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | Flex TR10; ASTM D1329 | ||
| Descriptive Properties | |||||
| Binder | Silicone | ||||
| EMP Survivability | >0.9 kA/in | MIL-DTL-83528 Para.4.6.16 | |||
| Filler | Ag | ||||
| Heat Aging | <0.015 ohm-cm | MIL-DTL-83528 Para.4.6.15 | |||
| Vibration Resistance, After | <0.01ohm-cm | MIL-DTL-83528 Para.4.6.13 | |||
| Vibration Resistance, During | <0.015 ohm-cm | MIL-DTL-83528 Para.4.6.13 | |||
