| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.55 - 2.05 g/cc | 1.55 - 2.05 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 50 - 64 | 50 - 64 | ASTM D2240 | ||
| Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 | ||
| Elongation at Break | >= 100 % | >= 100 % | ASTM D412 | ||
| Tear Strength | 6.130 kN/m | 34.98 pli | ASTM D624 | ||
| Compression Set | <= 30 % @Temperature 100 °C, Time 252000 sec | <= 30 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.75 ohm-cm | 0.75 ohm-cm | without psa; CEPS-0002 | ||
| Shielding Effectiveness | >= 80 dB @Frequency 2.00e+9 Hz | >= 80 dB @Frequency 2.00e+9 Hz | CHO-TM-TP08 | ||
| >= 80 dB @Frequency 1.00e+10 Hz | >= 80 dB @Frequency 1.00e+10 Hz | CHO-TM-TP08 | |||
| >= 90 dB @Frequency 1.00e+8 Hz | >= 90 dB @Frequency 1.00e+8 Hz | CHO-TM-TP08 | |||
| >= 90 dB @Frequency 5.00e+8 Hz | >= 90 dB @Frequency 5.00e+8 Hz | CHO-TM-TP08 | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |||
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Flex TR10; ASTM D5470 | ||
| Flammability, UL94 | V-1 | V-1 | |||
| Descriptive Properties | |||||
| Binder | Silicone | ||||
| Filler | Ni/C | ||||
| Heat Aging | <0.85 ohm-cm | 150°C for 48 hrs; CEPS-0002 | |||
