DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler物性表参数

DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler

DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler 物性表: DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler物性表及特性介绍,DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler注塑参数详情,如需DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler下载, 可到相关下载区下载

弯曲强度 [MPa]: 14.5

Mechanical Properties	Metric	English	Comments

Hardness, Shore A	75	75	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D2240-91
Tensile Strength, Ultimate	14.5 MPa	2100 psi	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412-92
Elongation at Break	140 %	140 %	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412-92
100% Modulus	0.0114 GPa	1.65 ksi	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412-92
Tear Strength	21.2 kN/m	121 pli	Die C, Cured 10 min at 177°C and Post Cured 24 hr at 232°C
Compression Set	16 % @Temperature 200 °C	16 % @Temperature 392 °F	Method B, O-rings 70 hr; ASTM D1414-94

关键词:
TSE
供应
DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36278.html

免责声明: 本文 DuPont Performance Polymers Viton® AL-300 with 30 phr Celite® 350 Filler 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息