DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler

DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler 物性表: DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler物性表及特性介绍,DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler注塑参数详情,如需DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler下载, 可到相关下载区下载

弯曲强度 [MPa]: 13.2

Mechanical Properties	Metric	English	Comments

Hardness, Shore A	63	63	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412
Tensile Strength, Ultimate	13.2 MPa	1910 psi	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412
Elongation at Break	220 %	220 %	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412
100% Modulus	0.00470 GPa	0.682 ksi	Cured 10 min at 177°C and Post Cured 24 hr at 232°C; ASTM D412
Tear Strength	18.7 kN/m	107 pli	Cured 10 min at 177°C and Post Cured 24 hr at 232°C
Compression Set	13 % @Temperature 200 °C	13 % @Temperature 392 °F	Method B, O-rings 70 hr; ASTM D1414

关键词:
TSE
供应
DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36291.html

免责声明: 本文 DuPont Performance Polymers Viton® AL-600 with 30 phr Ti-Pure® 30 Filler 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。