TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler

TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler 物性表: TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler物性表及特性介绍,TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler注塑参数详情,如需TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler下载, 可到相关下载区下载

拉伸强度 [MPa]: 21.4

Physical Properties	Metric	English	Comments

Specific Gravity	1.13 g/cc	1.13 g/cc
Mooney Viscosity	26 @Temperature 121 °C	26 @Temperature 250 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	58	58
Tensile Strength, Yield	21.4 MPa	3100 psi
Elongation at Yield	475 %	475 %
100% Modulus	0.00155 GPa	0.225 ksi
300% Modulus	0.00310 GPa	0.450 ksi
Tear Strength	29.2 kN/m	167 pli	Graves
Compression Set	22 %	22 %	Method B

Processing Properties	Metric	English	Comments
Cure Time	90.0 min @Temperature 142 °C	1.50 hour @Temperature 287 °F

关键词:
供应
聚氨酯TS
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37231.html

免责声明: 本文 TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 10 PHR Hi-Sil 233 Filler 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。