Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam

Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam 物性表: Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam物性表及特性介绍,Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam注塑参数详情,如需Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.637
  • 拉伸强度 [MPa]: 2.0
 
Physical PropertiesMetricEnglishComments
Density 0.637 g/cc0.0230 lb/in³ASTM D1667
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 2.00 MPa290 psiASTM D3574
Elongation at Break 300 %300 %ASTM D3574
Tensile Modulus 0.00110 GPa0.160 ksiASTM D3574
Compressive Strength 0.241 MPa35.0 psiCompression Deflection, Value given for 12.7 mm/min, 25% deflection.; ASTM D3574 Test C
Compressive Modulus 0.000552 GPa0.0800 ksiForce to Compress, Value given for 25% compression; ASTM D1667
Tear Strength 6.14 kN/m35.0 pliInitial Tear Strength; ASTM D624 Die C
Compression Set <= 3.0 %<= 3.0 %Constant Deflection at 73°F; ASTM D 3574 Test D
 <= 7.0 %
@Temperature 70.0 °C
<= 7.0 %
@Temperature 158 °F
Constant Deflection; ASTM D 3574 Test D
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.30e+12 ohm-cm1.30e+12 ohm-cm
Surface Resistivity per Square 2.30e+13 ohm2.30e+13 ohm
Dielectric Strength 1.97 kV/mm50.0 kV/inASTM D149
 
Thermal PropertiesMetricEnglishComments
Thermal Conductivity 0.0865 W/m-K0.600 BTU-in/hr-ft²-°FASTM E1530
Maximum Service Temperature, Air 70.0 °C158 °FConstant use
 121 °C250 °FIntermittent
 
Descriptive Properties
Standard ColorBlack

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37582.html

免责声明: 本文 Saint-Gobain Korel® K60 Firm Micro-cellular Polyurethane Foam 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4