- 熔体流动速率 [g/10min]: 22.0
- 密度 [g/cm3]: 1.42
- 吸水率 [%]: 0.2
- 缺口冲击强度: 5.5
- 弯曲强度 [MPa]: 93.0
- 弯曲模量 [MPa]: 5.20
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 | ||
Water Absorption | 0.20 % | 0.20 % | 24 hour; ISO Test | ||
0.40 % | 0.40 % | ISO 62 | |||
Moisture Absorption at Equilibrium | 0.20 % | 0.20 % | 23°C/50% R.H.; ISO 62 | ||
Viscosity Test | 113 cm³/g | 113 cm³/g | Viscosity number | ||
Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | ASTM Data; MD | ||
Melt Flow | 22 g/10 min @Load 2.16 kg, Temperature 250 °C | 22 g/10 min @Load 4.76 lb, Temperature 482 °F | ISO 1133 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength, Ultimate | 93.0 MPa | 13500 psi | 5mm/min; ISO 527 | ||
Elongation at Break | 3.8 % | 3.8 % | 5mm/min; ISO 527 | ||
Tensile Modulus | 5.70 GPa | 827 ksi | 1mm/min; ISO 527 | ||
Flexural Modulus | 5.20 GPa | 754 ksi | ISO Data | ||
Izod Impact, Notched (ISO) | 5.50 kJ/m² | 2.62 ft-lb/in² | ISO Test | ||
Charpy Impact, Notched | 0.400 J/cm² | 1.90 ft-lb/in² | ISO 179 | ||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 223 °C | 433 °F | 10 K/min | ||
223 °C | 433 °F | ASTM Test | |||
Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | ISO 75 | ||
Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | |||
HB @Thickness 0.800 mm | HB @Thickness 0.0315 in | ||||
Descriptive Properties | |||||
Color | BK5110 | ||||
Commercial Status | Active America | ||||
Form | Pellets | ||||
Impact Modified | No | ||||
NSF Std. 61 | Yes | ||||
Primary Processing Technique | Injection Molding | ||||
Special characteristic | Heat stabilized or stable to heat | ||||
Light stabilized or stable to light | |||||
Lubricant | |||||
U.V. stabilized or stable to weather |