DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade)

DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade) 物性表: DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade)物性表及特性介绍,DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade)注塑参数详情,如需DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade)下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 27.36
  • 密度 [g/cm3]: 1.52
  • 吸水率 [%]: 0.3
  • 热变形温度 [℃]: 220.0
 
Physical PropertiesMetricEnglishComments
Density 1.52 g/cc0.0549 lb/in³ISO 1183
Water Absorption 0.30 %0.30 %Sim. to ISO 62
Moisture Absorption at Equilibrium 0.15 %0.15 %Humidity Absorption; Sim. to ISO 62
Melt Flow 27.36 g/10 min
@Load 2.16 kg,
Temperature 250 °C
27.36 g/10 min
@Load 4.76 lb,
Temperature 482 °F
Calculated from Volume Flow Rate of 18 cm3/10min.; ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 140 MPa20300 psiISO 527-1/-2
Elongation at Break 3.0 %3.0 %ISO 527-1/-2
Tensile Modulus 10.0 GPa1450 ksiISO 527-1/-2
Charpy Impact Unnotched  6.00 J/cm²
@Temperature -30.0 °C
28.6 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 6.00 J/cm²
@Temperature 23.0 °C
28.6 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm²
@Temperature -30.0 °C
4.76 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 1.00 J/cm²
@Temperature 23.0 °C
4.76 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 1.00e+15 ohm-cm>= 1.00e+15 ohm-cmIEC 60093
Surface Resistance >= 1.00e+15 ohm>= 1.00e+15 ohmIEC 60093
Dielectric Constant  3.7
@Frequency 1e+6 Hz
3.7
@Frequency 1e+6 Hz
IEC 60250
 3.9
@Frequency 100 Hz
3.9
@Frequency 100 Hz
IEC 60250
Dielectric Strength 30.0 kV/mm762 kV/inIEC 60243-1
Dissipation Factor  0.0025
@Frequency 100 Hz
0.0025
@Frequency 100 Hz
IEC 60250
 0.017
@Frequency 1e+6 Hz
0.017
@Frequency 1e+6 Hz
IEC 60250
Comparative Tracking Index 475 V475 VIEC 60112
 400 - 599 V400 - 599 VPLC 1; UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 40.0 µm/m-°C
@Temperature 20.0 °C
22.2 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 70.0 µm/m-°C
@Temperature 20.0 °C
38.9 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point 225 °C437 °F10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 220 °C428 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 205 °C401 °FISO 75-1/-2
UL RTI, Electrical  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 0.710 mm
284 °F
@Thickness 0.0280 in
UL746B
UL RTI, Mechanical with Impact  130 °C
@Thickness 0.710 mm
266 °F
@Thickness 0.0280 in
UL746B
 130 °C
@Thickness 1.50 mm
266 °F
@Thickness 0.0591 in
UL746B
UL RTI, Mechanical without Impact  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 0.710 mm
284 °F
@Thickness 0.0280 in
UL746B
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
IEC 60695-11-10
 HB
@Thickness 0.710 mm
HB
@Thickness 0.0280 in
IEC 60695-11-10
Oxygen Index 20 %20 %ISO 4589-1/-2
 
Descriptive Properties
Injection MoldingYes
Release AgentYes
With FillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38037.html

免责声明: 本文 DSM Arnite® TV4 261 PBT-30% Glass Reinforced (European and Asian Grade) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4