Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced

Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced 物性表: Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced物性表及特性介绍,Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced注塑参数详情,如需Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.52
  • 吸水率 [%]: 0.35
  • 缺口冲击强度: 9.0
  • 弯曲模量 [MPa]: 8.00
  • 热变形温度 [℃]: 220.0
 
Physical PropertiesMetricEnglishComments
Density 1.52 g/cc0.0549 lb/in³ISO 1183
Filler Content 30 %30 %ISO 3451
Moisture Absorption at Equilibrium 0.14 %0.14 %Humidity Absorption, 50% RH, 23°C; ISO 62
Water Absorption at Saturation 0.35 %0.35 %23°C; ISO 62
Linear Mold Shrinkage 0.0030 cm/cm0.0030 in/in
Linear Mold Shrinkage, Transverse 0.010 cm/cm0.010 in/in
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 135 MPa19600 psiISO 527
Elongation at Break 2.5 %2.5 %ISO 527
Tensile Modulus 9.50 GPa1380 ksiISO 527
Flexural Strength 190 MPa27600 psi23°C, at break; ISO 178
Flexural Modulus 8.00 GPa1160 ksiISO 178
Izod Impact, Notched (ISO)  9.00 kJ/m²
@Temperature -30.0 °C
4.28 ft-lb/in²
@Temperature -22.0 °F
ISO 180/1A
 11.0 kJ/m²
@Temperature 23.0 °C
5.23 ft-lb/in²
@Temperature 73.4 °F
ISO 180/1A
Charpy Impact Unnotched  5.50 J/cm²
@Temperature -30.0 °C
26.2 ft-lb/in²
@Temperature -22.0 °F
ISO 179/eU
 6.50 J/cm²
@Temperature 23.0 °C
30.9 ft-lb/in²
@Temperature 73.4 °F
ISO 179/eU
Charpy Impact, Notched  1.10 J/cm²
@Temperature -30.0 °C
5.24 ft-lb/in²
@Temperature -22.0 °F
ISO 179/eA
 1.20 J/cm²
@Temperature 23.0 °C
5.71 ft-lb/in²
@Temperature 73.4 °F
ISO 179/eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+16 ohm-cm1.00e+16 ohm-cmIEC 60093
Surface Resistance 1.00e+14 ohm1.00e+14 ohmIEC 60093
Comparative Tracking Index 500 V500 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
Melting Point 225 °C437 °F10 K/min; ISO 3146
Deflection Temperature at 0.46 MPa (66 psi) 220 °C428 °FISO 75-1/2
Deflection Temperature at 1.8 MPa (264 psi) 205 °C401 °FISO 75-1/2
Vicat Softening Point 210 °C410 °F50N; ISO 306
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
 HB
@Thickness 3.20 mm
HB
@Thickness 0.126 in
Glow Wire Test 650 °C
@Thickness 2.00 mm
1200 °F
@Thickness 0.0787 in
plaque; IEC 60695

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38198.html

免责声明: 本文 Eurotec® Tecodur® PB70 GR30 NL PBT 30% glass fiber reinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4