Plenco 51240 PET, Pellet, Injection Molded, Blue

Plenco 51240 PET, Pellet, Injection Molded, Blue 物性表: Plenco 51240 PET, Pellet, Injection Molded, Blue物性表及特性介绍,Plenco 51240 PET, Pellet, Injection Molded, Blue注塑参数详情,如需Plenco 51240 PET, Pellet, Injection Molded, Blue下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.79
  • 吸水率 [%]: 0.05
  • 缺口冲击强度: 0.74
  • 断裂伸长率 [%]: 180
  • 弯曲强度 [MPa]: 105.9
  • 弯曲模量 [MPa]: 10.38
 
Physical PropertiesMetricEnglishComments
Density 1.79 g/cc0.0647 lb/in³ASTM D792
Water Absorption 0.050 %0.050 %ASTM D570
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 105.9 MPa15360 psiASTM D638
Elongation at Break 1.18 %1.18 %ASTM D638
Tensile Modulus 13.2 GPa1910 ksiASTM D638
Flexural Yield Strength 180 MPa26100 psiASTM D790
Flexural Modulus 10.38 GPa1506 ksiASTM D790
Compressive Yield Strength 164 MPa23800 psiASTM D695
Izod Impact, Notched 0.740 J/cm1.39 ft-lb/inASTM D256
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 2.40e+16 ohm-cm2.40e+16 ohm-cmASTM D257
Dielectric Constant 3.7
@Frequency 1e+6 Hz
3.7
@Frequency 1e+6 Hz
ASTM D150
Dielectric Strength 17.0 kV/mm432 kV/inShort Time; ASTM D149
Dissipation Factor 0.013
@Frequency 1e+6 Hz
0.013
@Frequency 1e+6 Hz
ASTM D150
Arc Resistance 20 sec20 secASTM D495
Comparative Tracking Index 225 V225 VASTM D3638
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 1.8 MPa (264 psi) 219 °C426 °FASTM D648
Flammability, UL94 V-0
@Thickness 1.47 mm
V-0
@Thickness 0.0579 in

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39270.html

免责声明: 本文 Plenco 51240 PET, Pellet, Injection Molded, Blue 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4