LyondellBasell Petrothene® NA952000 Low Density Polyethylene物性表参数

LyondellBasell Petrothene® NA952000 Low Density Polyethylene

LyondellBasell Petrothene® NA952000 Low Density Polyethylene 物性表: LyondellBasell Petrothene® NA952000 Low Density Polyethylene物性表及特性介绍,LyondellBasell Petrothene® NA952000 Low Density Polyethylene注塑参数详情,如需LyondellBasell Petrothene® NA952000 Low Density Polyethylene下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 2.0
密度 [g/cm3]: 0.919

Physical Properties	Metric	English	Comments

Density	0.919 g/cc	0.0332 lb/in³	ASTM D1505
Thickness	31.8 microns	1.25 mil	2:1 BUR; 25 mil die gap
Melt Flow	2.0 g/10 min	2.0 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	12.4 MPa	1800 psi	Molded; ASTM D638
Film Elongation at Break, MD	200 %	200 %	ASTM D882
Film Elongation at Break, TD	500 %	500 %	ASTM D882
Elongation at Break	650 %	650 %	Molded; ASTM D638
Elmendorf Tear Strength MD	350 g	350 g	ASTM D1922
Elmendorf Tear Strength TD	70 g	70 g	ASTM D1922
Dart drop Test	110 g	0.243 lb	F₅₀; ASTM D1709
Film Tensile Strength at Break, MD	22.1 MPa	3200 psi	ASTM D882
Film Tensile Strength at Break, TD	15.9 MPa	2300 psi	ASTM D882
1% Secant Modulus, MD	183 MPa	26500 psi	ASTM D882
1% Secant Modulus, TD	221 MPa	32000 psi	ASTM D882

Thermal Properties	Metric	English	Comments
Vicat Softening Point	85.0 °C	185 °F	ASTM D1525

Processing Properties	Metric	English	Comments
Melt Temperature	177 °C	350 °F

Descriptive Properties
Antiblock	None
Slip	None

关键词:
LDPE
供应
LyondellBasell Petrothene® NA952000 Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41399.html

免责声明: 本文 LyondellBasell Petrothene® NA952000 Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络