Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene物性表参数

Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene

Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene 物性表: Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene物性表及特性介绍,Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene注塑参数详情,如需Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene下载, 可到相关下载区下载

缺口冲击强度: 0.427
弯曲模量 [MPa]: 1.38

Physical Properties	Metric	English	Comments

Specific Gravity	0.960 g/cc	0.960 g/cc	ASTM D792
Melt Index of Compound	8.0 g/10 min @Load 2.16 kg, Temperature 190 °C	8.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	30.3 MPa	4400 psi	ASTM D638
Elongation at Break	680 %	680 %	ASTM D638
Flexural Strength	48.3 MPa	7000 psi	ASTM D790
Flexural Modulus	1.38 GPa	200 ksi	ASTM D790
Izod Impact, Notched	0.427 J/cm	0.800 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	86.1 °C	187 °F	ASTM D648

关键词:
HDPE
供应
Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42083.html

免责声明: 本文 Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息