- 熔体流动速率 [g/10min]: 5.0
- 密度 [g/cm3]: 0.935
- 拉伸强度 [MPa]: 17.5
- 弯曲模量 [MPa]: 0.680
- 热变形温度 [℃]: 58.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.935 g/cc | 0.0338 lb/in³ | ASTM D 792 |
| ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C | >= 1000 hour @Temperature 122 °F | Bent Strip, Condition A & B, F50 values, From compression molded samples; ASTM D 1693 |
| Melt Flow | 5.0 g/10 min @Load 2.16 kg, Temperature 190 °C | 5.0 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D 1238 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 17.5 MPa @Thickness 1.91 mm | 2540 psi @Thickness 0.0750 in | Type IV specimen, 2" per minute test speed, compression molded sample; ASTM D 638 |
| Elongation at Yield | 12 % @Thickness 1.91 mm | 12 % @Thickness 0.0750 in | Type IV specimen, 2" per minute test speed, compression molded sample; ASTM D 648 |
| Flexural Modulus | 0.680 GPa | 98.6 ksi | 1% Strain Value, From compression molded samples; ASTM D 790 |
| Impact Test | 67.8 J @Thickness 3.17 mm, Temperature -40.0 °C | 50.0 ft-lb @Thickness 0.125 in, Temperature -40.0 °F | Rotomolded samples; ARM Method |
| 217 J @Thickness 0.250 mm, Temperature -40.0 °C | 160 ft-lb @Thickness 0.00984 in, Temperature -40.0 °F | Rotomolded samples; ARM Method | |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 125 °C | 257 °F | ASTM E 794 |
| Deflection Temperature at 0.46 MPa (66 psi) | 58.0 °C | 136 °F | ASTM D 648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 42.0 °C | 108 °F | ASTM D 648 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 204 - 315 °C | 399 - 599 °F | Recommended oven temperature |