Orbilan ORBILAN® PE 500 HMW-PE

Orbilan ORBILAN® PE 500 HMW-PE 物性表: Orbilan ORBILAN® PE 500 HMW-PE物性表及特性介绍,Orbilan ORBILAN® PE 500 HMW-PE注塑参数详情,如需Orbilan ORBILAN® PE 500 HMW-PE下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.95
  • 拉伸强度 [MPa]: 27.0
 
Physical PropertiesMetricEnglishComments
Density 0.950 g/cc0.0343 lb/in³ISO 1183
Molecular Weight 500000 g/mol500000 g/mol
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 6565ISO 868
Ball Indentation Hardness 50.0 MPa7250 psiISO 2039
Tensile Strength, Yield 27.0 MPa3920 psiISO 527-1
Elongation at Break >= 600 %>= 600 %ISO 527-1
Elongation at Yield 9.0 %9.0 %ISO 527-1
Modulus of Elasticity 1.20 GPa174 ksiISO 527-1
Charpy Impact, Notched 2.50 J/cm²11.9 ft-lb/in²ISO 179
Coefficient of Friction 0.200.20DIN 53 375
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 1.00e+14 ohm-cm>= 1.00e+14 ohm-cmDIN 53 482
 
Thermal PropertiesMetricEnglishComments
CTE, linear 150 - 200 µm/m-°C
@Temperature 20.0 - 80.0 °C
83.3 - 111 µin/in-°F
@Temperature 68.0 - 176 °F
DIN 53 752-A
Thermal Conductivity 0.400 W/m-K2.78 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 80.0 °C176 °Fcontinuous
Minimum Service Temperature, Air -60.0 °C-76.0 °Fcontinuous
 
Descriptive Properties
Attrition< 400Sand-Slurry procedure
Water Absorption< 0.01 mg

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42968.html

免责声明: 本文 Orbilan ORBILAN® PE 500 HMW-PE 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4