- 熔体流动速率 [g/10min]: 1.0
- 弯曲强度 [MPa]: 17.0
- 弯曲模量 [MPa]: 0.540
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Specific Gravity | 2.12 - 2.17 g/cc | 2.12 - 2.17 g/cc | ASTM D792 | ||
Water Absorption | <= 0.030 % | <= 0.030 % | ASTM D570 | ||
Melt Flow | 1.0 - 3.0 g/10 min | 1.0 - 3.0 g/10 min | |||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore D | 60 | 60 | ASTM D1706 | ||
Tensile Strength at Break | 39.0 MPa | 5660 psi | ASTM D638 | ||
Tensile Strength, Ultimate | 17.0 MPa @Temperature 250 °C | 2470 psi @Temperature 482 °F | ASTM D638 | ||
Elongation at Break | 340 % | 340 % | ASTM D638 | ||
740 % @Temperature 250 °C | 740 % @Temperature 482 °F | ASTM D638 | |||
Flexural Modulus | 0.540 GPa | 78.3 ksi | ASTM D790 | ||
Izod Impact, Notched | NB | NB | ASTM D256A | ||
Coefficient of Friction, Dynamic | 0.20 | 0.20 | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | >= 1.00e+18 ohm-cm | >= 1.00e+18 ohm-cm | ASTM D257 | ||
Surface Resistance | >= 1.00e+17 ohm | >= 1.00e+17 ohm | ASTM D257 | ||
Dielectric Constant | <= 2.1 @Frequency 60 Hz | <= 2.1 @Frequency 60 Hz | ASTM D150 | ||
<= 2.1 @Frequency 1000 Hz | <= 2.1 @Frequency 1000 Hz | ASTM D150 | |||
<= 2.1 @Frequency 1e+6 Hz | <= 2.1 @Frequency 1e+6 Hz | ASTM D150 | |||
Dissipation Factor | <= 0.00020 @Frequency 60 Hz | <= 0.00020 @Frequency 60 Hz | ASTM D150 | ||
<= 0.00020 @Frequency 1000 Hz | <= 0.00020 @Frequency 1000 Hz | ASTM D150 | |||
<= 0.00020 @Frequency 1e+6 Hz | <= 0.00020 @Frequency 1e+6 Hz | ASTM D150 | |||
Arc Resistance | >= 300 sec | >= 300 sec | ASTM D495 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear | 130 µm/m-°C @Temperature 20.0 °C | 72.2 µin/in-°F @Temperature 68.0 °F | ASTM D696 | ||
Specific Heat Capacity | 1.046 J/g-°C | 0.2500 BTU/lb-°F | |||
Thermal Conductivity | 0.251 W/m-K | 1.74 BTU-in/hr-ft²-°F | ASTM C177 | ||
Melting Point | 305 - 315 °C | 581 - 599 °F | |||
Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous | ||
Flammability, UL94 | V-0 | V-0 | |||
Oxygen Index | >= 95 % | >= 95 % | ASTM D2863 | ||
Descriptive Properties | |||||
Ball Pressure Temperature, °C | 230 | ||||
Flex Life, Cycles | 500000 |