- 密度 [g/cm3]: 1.68
- 断裂伸长率 [%]: 47.0
- 硬度: 94.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.68 g/cc | 0.0607 lb/in³ | ISO 1183-1 |
| Moisture Absorption at Equilibrium | 0.040 % | 0.040 % | 50% RH |
| Water Absorption at Saturation | <= 0.10 % | <= 0.10 % | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 94 | 94 | ISO 2039-2 |
| Hardness, Shore D | 70 | 70 | |
| Ball Indentation Hardness | 65.0 MPa | 9430 psi | ISO 2039-1 |
| Tensile Strength | 30.0 MPa | 4350 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | >= 50 % | >= 50 % | ISO 527-1/-2 |
| Elongation at Yield | 4.0 % | 4.0 % | ISO 527-1/-2 |
| Tensile Modulus | 1.60 GPa | 232 ksi | ISO 527-1/-2 |
| Flexural Yield Strength | 47.0 MPa | 6820 psi | |
| Compressive Strength | 14.5 MPa @Strain 1 % | 2100 psi @Strain 1 % | ISO 604 |
| 26.0 MPa @Strain 2 % | 3770 psi @Strain 2 % | ISO 604 | |
| 33.0 MPa @Strain 5 % | 4790 psi @Strain 5 % | ISO 604 | |
| K Factor (ISO) | 1100 µm/km | 1100 µm/km | |
| Charpy Impact Unnotched | NB | NB | ISO 179-1/1eU |
| Charpy Impact, Notched | 18.0 J/cm² | 85.7 ft-lb/in² | Partial Break; ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.35 - 0.45 | 0.35 - 0.45 | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.0e+14 ohm-cm | >= 1.0e+14 ohm-cm | IEC 60093 |
| Surface Resistivity per Square | >= 1.0e+13 ohm | >= 1.0e+13 ohm | IEC 60093 |
| Dielectric Constant | 2.5 @Frequency >=100000 Hz | 2.5 @Frequency >=100000 Hz | IEC 60250 |
| Dielectric Strength | 26.0 kV/mm | 660 kV/in | |
| Dissipation Factor | 0.0010 @Frequency 100000 Hz | 0.0010 @Frequency 100000 Hz | IEC 60250 |
| Comparative Tracking Index | 600 V | 600 V | IEC 60112 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 120 µm/m-°C @Temperature 23.0 - 100 °C | 66.7 µin/in-°F @Temperature 73.4 - 212 °F | |
| Thermal Conductivity | 0.150 W/m-K | 1.04 BTU-in/hr-ft²-°F | |
| Melting Point | 240 °C | 464 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 160 °C | 320 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75-1/-2 |
| Flammability, UL94 | V-0 | V-0 | |
| Oxygen Index | 52 % | 52 % | ISO 4589-1/-2 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Limited | Limited | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable | |