- 拉伸强度 [MPa]: 48.3
- 透光率 [%]: 90.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.70 - 1.76 g/cc | 1.70 - 1.76 g/cc | ASTM D-792 |
| Water Absorption | <= 0.030 % | <= 0.030 % | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 48.3 MPa | 7000 psi | ASTM D-882 |
| Elongation at Break | 300 % | 300 % | ASTM D-882 |
| Tensile Modulus | 0.965 GPa | 140 ksi | ASTM D-882 |
| Elmendorf Tear Strength, MD | 11.6 g/micron | 295 g/mil | (direction not reported), Propagation Tear Strength; ASTM D-1922 |
| Electrical Properties | Metric | English | Comments |
| Surface Resistivity per Square | 1.00e+14 ohm | 1.00e+14 ohm | ASTM D-257 |
| Dielectric Constant | 2.6 @Frequency 1000 Hz | 2.6 @Frequency 1000 Hz | ASTM D-150 |
| Dielectric Strength | 217 kV/mm | 5500 kV/in | ASTM D-149 |
| Dissipation Factor | <= 0.00080 | <= 0.00080 | ASTM D-150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 72.0 µm/m-°C @Temperature 20.0 °C | 40.0 µin/in-°F @Temperature 68.0 °F | ASTM D-696 |
| Specific Heat Capacity | 1.92 J/g-°C | 0.460 BTU/lb-°F | |
| Thermal Conductivity | 0.238 W/m-K | 1.65 BTU-in/hr-ft²-°F | ASTM D-2863 |
| Melting Point | 250 - 270 °C | 482 - 518 °F | ASTM D-3418 |
| Maximum Service Temperature, Air | 166 °C | 330 °F | UL-746 B |
| Flammability, UL94 | V-0 | V-0 | |
| Oxygen Index | >= 30 % | >= 30 % | ASTM D2863 |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.40 | 1.40 | ASTM D542 |
| Transmission, Visible | 90 % | 90 % | ASTM E424 |