SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP)

SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP) 物性表: SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP)物性表及特性介绍,SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP)注塑参数详情,如需SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.17
  • 缺口冲击强度: 6.83
  • 拉伸强度 [MPa]: 14.0
  • 断裂伸长率 [%]: 20.0
  • 弯曲模量 [MPa]: 0.790
  • 热变形温度 [℃]: 80.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 2.17 g/cc2.17 g/ccASTM D792
Density 2.17 g/cc0.0784 lb/in³ASTM D792
Moisture Absorption 0.0100 %0.0100 %50% RH, 24 hrs; ASTM D570
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 12.0 MPa1740 psiType I, 5 mm/min; ASTM D638
 13.0 MPa1890 psi5 mm/min; ISO 527
Tensile Strength, Yield 14.0 MPa2030 psi5 mm/min; ISO 527
 14.0 MPa2030 psiType I, 5 mm/min; ASTM D638
Elongation at Break 9.3 %9.3 %5 mm/min; ISO 527
 9.3 %9.3 %Type I, 5 mm/min; ASTM D638
Elongation at Yield 5.5 %5.5 %Type I, 5 mm/min; ASTM D638
 6.1 %6.1 %5 mm/min; ISO 527
Tensile Modulus 0.930 GPa135 ksi1 mm/min; ISO 527
 1.01 GPa146 ksi50 mm/min; ASTM D638
Flexural Strength 19.0 MPa2760 psiISO 178
Flexural Yield Strength 20.0 MPa2900 psi1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus 0.790 GPa115 ksi1.3 mm/min, 50 mm span; ASTM D790
 0.870 GPa126 ksi2 mm/min; ISO 178
Izod Impact, Notched 6.83 J/cm12.8 ft-lb/inASTM D256
Izod Impact, Unnotched 9.81 J/cm18.4 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 31.0 kJ/m²14.8 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 84.0 kJ/m²40.0 ft-lb/in²80*10*4; ISO 180/1U
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 80.0 °C176 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 79.0 °C
@Thickness 3.20 mm
174 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 61.0 °C142 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 57.0 °C
@Thickness 3.20 mm
135 °F
@Thickness 0.126 in
unannealed; ASTM D648
Flammability, UL94 V-0
@Thickness 1.50 mm
V-0
@Thickness 0.0591 in
UL 94 by SABIC-IP

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43329.html

免责声明: 本文 SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4