Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 2.20 - 2.23 g/cc | 2.20 - 2.23 g/cc | ASTM D792 |
Deformation | 5.4 - 6.4 % | 5.4 - 6.4 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
10 - 12 % | 10 - 12 % | ASTM D621 | |
Mechanical Properties | Metric | English | Comments |
Hardness, Shore D | 56 - 60 | 56 - 60 | ASTM D2240 |
Ball Indentation Hardness | 44.0 - 48.0 MPa | 6380 - 6960 psi | ISO 2032-N132 |
Tensile Strength at Break | >= 19.0 MPa | >= 2760 psi | ASTM D4894 |
Elongation at Break | >= 210 % | >= 210 % | ASTM D4894 |
Coefficient of Friction, Dynamic | 0.11 - 0.13 | 0.11 - 0.13 | ASTM D1894 |
Coefficient of Friction, Static | 0.18 - 0.20 | 0.18 - 0.20 | ASTM D1894 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | ASTM D257 |
Thermal Properties | Metric | English | Comments |
Melting Point | 327 °C | 621 °F | DSC |
Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
Minimum Service Temperature, Air | -120 °C | -184 °F | DSC |
Flammability, UL94 | V-0 | V-0 |