| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.93 - 1.95 g/cc | 1.93 - 1.95 g/cc | ASTM D792 |
| Deformation | 2.0 - 3.5 % | 2.0 - 3.5 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 3.0 - 5.5 % | 3.0 - 5.5 % | ASTM D621 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 60 - 64 | 60 - 64 | ASTM D2240 |
| Ball Indentation Hardness | 115 - 145 MPa | 16700 - 21000 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ASTM D4745-11 |
| Elongation at Break | >= 20 % | >= 20 % | ASTM D4745-11 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 10000 ohm-cm | 10000 ohm-cm | ASTM D257 |
| Surface Resistance | 1000 ohm | 1000 ohm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.340 W/m-K | 2.36 BTU-in/hr-ft²-°F | ASTM C 177 |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -140 °C | -220 °F | DSC |
| Flammability, UL94 | V-0 | V-0 | |
