| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 3.81 - 3.83 g/cc | 3.81 - 3.83 g/cc | ASTM D792 |
| Deformation | 2.0 - 3.0 % | 2.0 - 3.0 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 4.0 - 6.0 % | 4.0 - 6.0 % | ASTM D621 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 60 - 63 | 60 - 63 | ASTM D2240 |
| Ball Indentation Hardness | 57.0 - 60.0 MPa | 8270 - 8700 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 12.0 MPa | >= 1740 psi | ASTM D4894 |
| Elongation at Break | >= 80 % | >= 80 % | ASTM D4894 |
| Coefficient of Friction, Dynamic | 0.16 - 0.18 | 0.16 - 0.18 | ASTM D1894 |
| Coefficient of Friction, Static | 0.18 - 0.20 | 0.18 - 0.20 | ASTM D1894 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+7 ohm-cm | 1.00e+7 ohm-cm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -100 °C | -148 °F | DSC |
| Flammability, UL94 | V-0 | V-0 | |
