- 密度 [g/cm3]: 2.2
- 缺口冲击强度: 12.0
- 弯曲强度 [MPa]: 14.7
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.20 - 2.30 g/cc | 0.0795 - 0.0831 lb/in³ | ASTM D792 |
Deformation | 2.6 - 2.8 % @Temperature 150 °C, Time 86400 sec, Pressure 0.981 MPa | 2.6 - 2.8 % @Temperature 302 °F, Time 24.0 hour, Pressure 142 psi | total |
4.0 - 8.0 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 4.0 - 8.0 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | permanent; ASTM D621 | |
9.5 - 13.5 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 9.5 - 13.5 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | total; ASTM D621 | |
15 - 16 % @Temperature 150 °C, Time 86400 sec, Pressure 4.90 MPa | 15 - 16 % @Temperature 302 °F, Time 24.0 hour, Pressure 711 psi | total | |
Mechanical Properties | Metric | English | Comments |
Hardness, Shore D | 64 - 68 | 64 - 68 | ASTM D2240 |
Tensile Strength, Ultimate | 14.7 - 23.5 MPa | 2130 - 3410 psi | ASTM D638 |
Elongation at Break | 200 - 270 % | 200 - 270 % | ASTM D638 |
Compressive Strength | 6.37 - 6.86 MPa | 925 - 996 psi | 1% Deformation; ASTM D695 |
Izod Impact, Notched (ISO) | 12.0 - 15.0 kJ/m² | 5.71 - 7.14 ft-lb/in² | ASTM D256 |
Coefficient of Friction | 0.090 | 0.090 | |
Coefficient of Friction, Static | 0.070 | 0.070 | |
Limiting Pressure Velocity | 0.00351525 - 0.003597 MPa-m/sec | 100.360 - 102.7 psi-ft/min | 3 m/min |
0.0044145 - 0.004905 MPa-m/sec | 126.03 - 140.0 psi-ft/min | 30 m/min | |
0.0053955 - 0.005559 MPa-m/sec | 154.04 - 158.7 psi-ft/min | 300 m/min | |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | ASTM D257 |
Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | 50% rel. humidity; ASTM D257 |
Dielectric Constant | 2.5 - 2.8 @Frequency 50.0 - 1.00e+7 Hz | 2.5 - 2.8 @Frequency 50.0 - 1.00e+7 Hz | ASTM D150 |
Dielectric Strength | 13.0 - 16.0 kV/mm @Thickness 0.100 mm | 330 - 406 kV/in @Thickness 0.00394 in | short term; ASTM D149 |
Dielectric Loss Index | 0.00070 @Frequency 50.0 Hz | 0.00070 @Frequency 50.0 Hz | dry |
Thermal Properties | Metric | English | Comments |
CTE, linear | 70.0 - 115 µm/m-°C @Temperature 25.0 - 100 °C | 38.9 - 63.9 µin/in-°F @Temperature 77.0 - 212 °F | ASTM D696 |
75.0 - 140 µm/m-°C @Temperature 25.0 - 200 °C | 41.7 - 77.8 µin/in-°F @Temperature 77.0 - 392 °F | ASTM D696 | |
85.0 - 180 µm/m-°C @Temperature 25.0 - 300 °C | 47.2 - 100 µin/in-°F @Temperature 77.0 - 572 °F | ASTM D696 | |
Thermal Conductivity | 0.418 - 0.460 W/m-K | 2.90 - 3.19 BTU-in/hr-ft²-°F | |
Maximum Service Temperature, Air | 270 °C | 518 °F | continuous |
Minimum Service Temperature, Air | -260 °C | -436 °F |