- 密度 [g/cm3]: 3.05
- 缺口冲击强度: 11.0
- 弯曲强度 [MPa]: 14.7
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.05 - 3.15 g/cc | 0.110 - 0.114 lb/in³ | ASTM D792 |
| Deformation | 1.1 - 1.2 % @Temperature 150 °C, Time 86400 sec, Pressure 0.981 MPa | 1.1 - 1.2 % @Temperature 302 °F, Time 24.0 hour, Pressure 142 psi | total |
| 1.4 - 2.1 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 1.4 - 2.1 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | permanent; ASTM D621 | |
| 3.8 - 4.9 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 3.8 - 4.9 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | total; ASTM D621 | |
| 10 - 11 % @Temperature 150 °C, Time 86400 sec, Pressure 4.90 MPa | 10 - 11 % @Temperature 302 °F, Time 24.0 hour, Pressure 711 psi | total | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 64 - 68 | 64 - 68 | ASTM D2240 |
| Tensile Strength, Ultimate | 14.7 - 27.5 MPa | 2130 - 3980 psi | ASTM D638 |
| Elongation at Break | 120 - 280 % | 120 - 280 % | ASTM D638 |
| Compressive Strength | 9.81 - 10.3 MPa | 1420 - 1490 psi | 1% Deformation; ASTM D695 |
| Izod Impact, Notched (ISO) | 11.0 - 12.0 kJ/m² | 5.23 - 5.71 ft-lb/in² | ASTM D256 |
| Coefficient of Friction | 0.12 | 0.12 | |
| Coefficient of Friction, Static | 0.060 | 0.060 | |
| Limiting Pressure Velocity | 0.0040875 - 0.0044145 MPa-m/sec | 116.70 - 126.03 psi-ft/min | 3 m/min |
| 0.0057225 - 0.006213 MPa-m/sec | 163.38 - 177.4 psi-ft/min | 30 m/min | |
| 0.00654 - 0.08175 MPa-m/sec | 187 - 2334 psi-ft/min | 300 m/min | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.00e+8 ohm-cm | >= 1.00e+8 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.00e+10 ohm | >= 1.00e+10 ohm | 50% rel. humidity; ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 80.0 - 95.0 µm/m-°C @Temperature 25.0 - 100 °C | 44.4 - 52.8 µin/in-°F @Temperature 77.0 - 212 °F | ASTM D696 |
| 95.0 - 110 µm/m-°C @Temperature 25.0 - 200 °C | 52.8 - 61.1 µin/in-°F @Temperature 77.0 - 392 °F | ASTM D696 | |
| 125 - 135 µm/m-°C @Temperature 25.0 - 300 °C | 69.4 - 75.0 µin/in-°F @Temperature 77.0 - 572 °F | ASTM D696 | |
| Thermal Conductivity | 0.711 - 0.837 W/m-K | 4.93 - 5.80 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 270 °C | 518 °F | continuous |
| Minimum Service Temperature, Air | -260 °C | -436 °F | |