TriStar FCJ Composite Bearing

TriStar FCJ Composite Bearing 物性表: TriStar FCJ Composite Bearing物性表及特性介绍,TriStar FCJ Composite Bearing注塑参数详情,如需TriStar FCJ Composite Bearing下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.9
  • 缺口冲击强度: 7.47
 
Physical PropertiesMetricEnglishComments
Density 1.90 g/cc0.0686 lb/in³
Water Absorption <= 0.50 %
@Time 86400 sec
<= 0.50 %
@Time 24.0 hour
 
Mechanical PropertiesMetricEnglishComments
Compressive Strength 345 MPa50000 psi
Izod Impact, Notched 7.47 J/cm14.0 ft-lb/in
Limiting Pressure Velocity 0.701 MPa-m/sec20000 psi-ft/minUnlubricated
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 2.41e+18 ohm-cm2.41e+18 ohm-cm
Surface Resistance 3.93e+15 ohm3.93e+15 ohm
Dielectric Constant 4.15
@Frequency 1.00e+6 Hz
4.15
@Frequency 1.00e+6 Hz
Dissipation Factor 0.0094
@Frequency 1.00e+6 Hz
0.0094
@Frequency 1.00e+6 Hz
 
Thermal PropertiesMetricEnglishComments
CTE, linear 126 µm/m-°C70.0 µin/in-°F
Thermal Conductivity 0.202 W/m-K1.40 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 177 °C350 °F
Deflection Temperature at 1.8 MPa (264 psi) 177 °C350 °F
Minimum Service Temperature, Air -196 °C-320 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44205.html

免责声明: 本文 TriStar FCJ Composite Bearing 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4