DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)物性表参数

DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)

DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond) 物性表: DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)物性表及特性介绍,DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)注塑参数详情,如需DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)下载, 可到相关下载区下载

密度 [g/cm3]: 1.38
吸水率 [%]: 9.5
拉伸强度 [MPa]: 50.0

Physical Properties	Metric	English	Comments

Density	1.38 g/cc	0.0499 lb/in³	(DAM); ISO 1183
Water Absorption	9.5 %	9.5 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	2.6 %	2.6 %	Humidity Absorption (DAM); Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4
	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	50.0 MPa	7250 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	20 %	20 %	ISO 527-1/-2
Tensile Modulus	1.40 GPa	203 ksi	ISO 527-1/-2
Charpy Impact Unnotched	12.5 J/cm² @Temperature -30.0 °C	59.5 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm² @Temperature -30.0 °C	1.90 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	1.40 J/cm² @Temperature 23.0 °C	6.66 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	850 MPa	123000 psi	ISO 899-1

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+9 ohm-cm	1.00e+9 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	4.1 @Frequency 1e+6 Hz	4.1 @Frequency 1e+6 Hz	IEC 60250
	10 @Frequency 100 Hz	10 @Frequency 100 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
Dissipation Factor	0.0080 @Frequency 1e+6 Hz	0.0080 @Frequency 1e+6 Hz	IEC 60250
	0.028 @Frequency 100 Hz	0.028 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	325 V	325 V	IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	295 °C	563 °F	10°C/min (DAM); ISO 11357-1/-3

Descriptive Properties
Flame Retardant	Yes
Flame Retarding Agent	Yes
Heat Stabilized or Stable to Heat	Yes
Injection Molding	Yes
Lubricants	Yes
Platable	Yes
Release Agent	Yes
Without Fillers	Yes

关键词:
PA46
供应
DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44622.html

免责声明: 本文 DSM Stanyl® TE350 Nylon 46 (European and Asian Grade) (Cond) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络