SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46

SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46 物性表: SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46物性表及特性介绍,SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46注塑参数详情,如需SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.28
  • 缺口冲击强度: 0.52
  • 拉伸强度 [MPa]: 78.0
  • 弯曲模量 [MPa]: 2.80
  • 热变形温度 [℃]: 276.0
 
Physical PropertiesMetricEnglishComments
Density 1.28 g/cc0.0462 lb/in³ISO 1183
 1.29 g/cc0.0466 lb/in³ASTM D792
Moisture Absorption 1.80 %1.80 %50% RH, 24 hrs; ASTM D570
 2.70 %2.70 %23°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow >= 0.020 cm/cm
@Time 86400 sec
>= 0.020 in/in
@Time 24.0 hour
ASTM D955
Linear Mold Shrinkage, Transverse 0.020 - 0.040 cm/cm
@Time 86400 sec
0.020 - 0.040 in/in
@Time 24.0 hour
ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 74.0 MPa10700 psiType I, 5 mm/min; ASTM D638
 76.0 MPa11000 psi5 mm/min; ISO 527
Tensile Strength, Yield 78.0 MPa11300 psi5 mm/min; ISO 527
 80.0 MPa11600 psiType I, 5 mm/min; ASTM D638
Elongation at Break 5.9 %5.9 %Type I, 5 mm/min; ASTM D638
 6.6 %6.6 %5 mm/min; ISO 527
Elongation at Yield 5.8 %5.8 %Type I, 5 mm/min; ASTM D638
 6.5 %6.5 %5 mm/min; ISO 527
Tensile Modulus 3.00 GPa435 ksi1 mm/min; ISO 527
 3.13 GPa454 ksi50 mm/min; ASTM D638
Flexural Strength 101 MPa14600 psiISO 178
Flexural Modulus 2.80 GPa406 ksi2 mm/min; ISO 178
 2.96 GPa429 ksi1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched 0.520 J/cm0.974 ft-lb/inASTM D256
Izod Impact, Unnotched 9.24 J/cm17.3 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 5.00 kJ/m²2.38 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 56.0 kJ/m²26.6 ft-lb/in²80*10*4; ISO 180/1U
Dart Drop, Total Energy 3.00 J
@Temperature 23.0 °C
2.21 ft-lb
@Temperature 73.4 °F
ASTM D3763
Coefficient of Friction, Dynamic 0.320.32ASTM D3702 Modified
Coefficient of Friction, Static 0.320.32ASTM D3702 Modified
K (wear) Factor 22.2 x 10-8 mm³/N-M11.0 x 10-10 in³-min/ft-lb-hrWasher; ASTM D3702 Modified
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 100 µm/m-°C
@Temperature -30.0 - 30.0 °C
55.6 µin/in-°F
@Temperature -22.0 - 86.0 °F
ASTM D696
CTE, linear, Transverse to Flow 92.6 µm/m-°C
@Temperature -30.0 - 30.0 °C
51.4 µin/in-°F
@Temperature -22.0 - 86.0 °F
ASTM D696
Deflection Temperature at 0.46 MPa (66 psi) 276 °C529 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 283 °C
@Thickness 3.20 mm
541 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 92.0 °C198 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 151 °C
@Thickness 3.20 mm
304 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44717.html

免责声明: 本文 SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4