- 密度 [g/cm3]: 1.16
- 缺口冲击强度: 0.27
- 弯曲强度 [MPa]: 94.0
- 弯曲模量 [MPa]: 3.40
- 硬度: 120.0
- 热变形温度 [℃]: 199.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.16 g/cc | 0.0419 lb/in³ | |
Linear Mold Shrinkage | 0.0080 cm/cm | 0.0080 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 120 | 120 | ASTM D785 |
Tensile Strength, Ultimate | 94.0 MPa | 13600 psi | ASTM D638 |
Elongation at Break | 10 % | 10 % | ASTM D638 |
Flexural Strength | 129 MPa | 18700 psi | ASTM D790 |
Flexural Modulus | 3.40 GPa | 493 ksi | ASTM D790 |
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
Izod Impact, Unnotched | 13.34 J/cm | 24.99 ft-lb/in | ASTM D256 |
K (wear) Factor | 302 x 10-8 mm³/N-M | 150 x 10-10 in³-min/ft-lb-hr | K=W/PVT where W=wear (inches^3); P=applied pressure (psi); V=velocity (fpm); T=time (hours). |
Limiting Pressure Velocity | 0.490 MPa-m/sec | 14000 psi-ft/min | |
Thermal Properties | Metric | English | Comments |
Melting Point | 255 - 275 °C | 491 - 527 °F | |
Deflection Temperature at 0.46 MPa (66 psi) | 199 °C | 390 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 79.0 °C | 174 °F | ASTM D648 |
Processing Properties | Metric | English | Comments |
Processing Temperature | 290 °C | 554 °F | Approximate middle barrel temperature. |